BWKYS - 10-150 SILICONE RUBBER ADHESIVE/SEALANT

  • MSDS: BWKYS
  • Manufacturer: GC THORSEN
  • Product Name: 10-150 SILICONE RUBBER ADHESIVE/SEALANT
  • National Stock Number: 8040-01-236-8599
Product Identification

Product ID:10-150 SILICONE RUBBER ADHESIVE/SEALANT
MSDS Date:11/10/1994
FSC:8040
NIIN:01-236-8599
MSDS Number: BWKYS

Responsible Party
GC THORSEN
1801 MORGAN ST
ROCKFORD, IL 61105-1209
US

Emergency Phone: 815-968-9661

Info Phone: 815-968-9661

Preparer: M WINSEL

Cage: EO177

Contractor
GC THORSEN
1209 ROCKFORD, IL 61105-1209 US

Telephone: 815-968-9661

Cage: EO177

Ingredients

ACETOXYSILANE

Fraction By Weight: 5%

OSHA PEL 10 PPM

ACGIH TLV: 10 PPM


INERT INGREDIENTS (TYPE NOT SPECIFIED)

Fraction By Weight: 95%

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION, POSSIBLE MINOR
CORNEAL INJURY. SKIN: MODERATE IRRITATION/MILD BURN. INHALATION:
SLIGHT IRRITATION TO RESPIRATORY PASSAGES.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, REDNESS, BURNS

First Aid

First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WASH W/SOAP & WATER.
INHALATION: MOVE TO FRESH AIR, OXYGEN. OBTAIN MEDICAL ATTENTION IN
ALL CASES.

Fire Fighting

Flash Point Method:OC
Flash Point:990F
Extinguishing Media:CO2, CHEMICAL FOAM
Fire Fighting Procedures:USE SELF CONTAINED BREATHING APPARATUS &
PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:USE ABSORBENT MATERIAL TO COLLECT. CONTAIN FOR
DISPOSAL/SALVAGE.

Exposure Controls

Ventilation:MECHANICAL AS REQUIRED TO MEET TLV'S
Protective Gloves:RUBBER/PLASTIC
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:300.2F
Vapor Pres:<5
Spec Gravity:1.05
Evaporation Rate & Reference:(BU AC=1): <1
Solubility in Water:0.1%
Appearance and Odor:CLEAR, WHITE/BLACK PASTE W/ACETIC ACID ODOR
Percent Volatiles by Volume:<5

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:AIR, MOISTURE

Disposal

Waste Disposal Methods:MATERIAL IS INERT. NON-HAZARDOUS AFTER CURING IN
AIR. DISPOSE OF IN ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.